- per page
Recommended by Justin Pate Pre-cut better than felt buffers fit standard 4'' squeegee.
The Alumalite HD Liner Cut tool is a precision, hand-held device utilizing a standard single edged razor blade. The blade depth adjustment is as simple as using a screw driver, which can control the depth of cut to less than a thousandth of an inch. The blade can be mounted on either side of the unit, for either left hand or right hand operation.
Alumalite® Squeegees are used by professional shops and installers. Made of lightweight aluminum for easy use, solid construction and years of use.
The sooper-glide felt edges make for a smooth application with no harm to the sign or substrate. Be sure to watch our videos online to see how fast and easy these tools are.
Works with almost any door using push pins or panel clips. Removes push pins with center locking pin
BT1003 Banner-Trak Slider w/ thumb screws (per pair)
BT1004 Slatwall Hanging Kit
(6) Plated Hooks
(6) 8/32'' x 3/8'' Screws
(6) 8/32'' x 3/8'' Hex Nuts
BT1006 Convention Clip Kit
(2) Black Clips
(4) 8/32'' x 3/8'' Flathead Screws
(2) 1/4'' x 20 x 1-1/4'' Thumb Screws
Banner-Trak Kit
(2) 4' Sections
(1) Connector
(4) Sliders with thumb screws
Use it to put a pin hole into your vinyl or printed grahics, over a rivet or a bubble to release the air.
Discontinued item: Limited to stock on hand.
Identify brand name, material type and specifications at a quick glance
- per page
